Ram Rebel Forum banner

Revel Performance Links

18K views 18 replies 11 participants last post by  bigdave2212 
I'm not sure why anyone would buy them. You can make your own from plastic tubing for less than $5.

Or, you could make professional quality adjustable links with socket tips for less than $30.


Or you can buy the Revel links for $300 on sale. There's almost no difference between these and what you can make yourself. Plus the homemade ones like in the pic above look much better.
https://www.revelperformance.com/do...sion-links-for-lowering-2013-2015-rams-clone/
 
That's my picture! I built those. They are simple to build. If you can thread a nut on a bolt, you can build these.
Yes, it is your pic. And you did a nice job. Sorry, I thought I got a link to the forum page in there, too but must have clicked something wrong, or there would have been a link to your post with the pic in it.
 
Able to share where you found the components for this? up here in canada I have been unable to find suitable source that would ship here. :)
Those parts can be found in auto parts stores, or even farm equipment stores around here. Threaded rod and nuts in every big box store and most small hardware stores. Even in stainless steel, it's not tough to find. The ball sockets are only slightly harder to find. They're common sizes used in riding mowers, snow blowers, and all kinds of other equipment. Finding them in stainless is the only real challenge, and it's not insurmountable.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top