I tried searching around on the forum and I don't think anyone has installed Revel links on their rebels yet. Maybe there are reviews of it being used on other Ram trucks?
Yes, it is your pic. And you did a nice job. Sorry, I thought I got a link to the forum page in there, too but must have clicked something wrong, or there would have been a link to your post with the pic in it.
Yes, it is your pic. And you did a nice job. Sorry, I thought I got a link to the forum page in there, too but must have clicked something wrong, or there would have been a link to your post with the pic in it.
Those parts can be found in auto parts stores, or even farm equipment stores around here. Threaded rod and nuts in every big box store and most small hardware stores. Even in stainless steel, it's not tough to find. The ball sockets are only slightly harder to find. They're common sizes used in riding mowers, snow blowers, and all kinds of other equipment. Finding them in stainless is the only real challenge, and it's not insurmountable.
I actually bought all the components on eBay. It was much cheaper than buying them here in local hardware stores. If memory serves be correctly, I believe I only have around 45 bucks with everything and I even had extra threaded rod. Eventually I will make another set to lower my truck. Not that I like lowered trucks, but it would be cool to just have an extra set in my truck just in case the need/want arrises.
I actually bought all the components on eBay. It was much cheaper than buying them here in local hardware stores. If memory serves be correctly, I believe I only have around 45 bucks with everything and I even had extra threaded rod. Eventually I will make another set to lower my truck. Not that I like lowered trucks, but it would be cool to just have an extra set in my truck just in case the need/want arrises.
So where did you find the ball sockets? And was the size of the ball 5/16, 8mm ? I have a 2019 rebel with air ride and would like to build a set. Thanks for your time.
So where did you find the ball sockets? And was the size of the ball 5/16, 8mm ? I have a 2019 rebel with air ride and would like to build a set. Thanks for your time.
Grainger has them. Mine was 8mm and 10mm with 5mm bolt rod in-between. Think I spent $35 for the rod ends. I got the bolt rod from work but can't imagine it would be that much more
Grainger has them. Mine was 8mm and 10mm with 5mm bolt rod in-between. Think I spent $35 for the rod ends. I got the bolt rod from work but can't imagine it would be that much more
Any chance you could provide some part numbers and quantities of each size? Grainger has several options, and I'd like to make sure I get the right parts.
Any chance you could provide some part numbers and quantities of each size? Grainger has several options, and I'd like to make sure I get the right parts.
Sure can.......I want to say I started at the stock length and shortened them about a ¼ inch. I could be wrong. Just measure the rears and small adjustments till you get to where you want to be. I was putting the locks on there every time but finally got smart, took them off till I was done totally.
Did you end up putting these on your 19? Did they work? I am looking to do this to a 19 as well. Wanted to see how they turned out for you. This great to have the part numbers listed!
Hello All,
My 2016 Rebel is giving me an error message "Selected Ride Height Not Permitted Due to Payload" when trying to raise or lower the truck. It appears the air suspension has gone into "protection mode." It will not allow me to raise or lower the truck and the back end of the truck is...
I've got a new 2017 and I just checked my tire pressure.
The sticker says it should be 55 PSI Front and 45 PSI Rear.
Tire pressure from the dealer is Front 55-53. Rear 60-57.
*** Edit the readings are when the tires are cold.
Hi all, I have researched this forum a lot and bought the cft front suspension links. I installed them today and want to provide some real world data. 1. Out of the box they raised my 2018 rebel exactly one inch. 2. The thread into the a frame are weak and the top bolt will strip the threads of...
I looked around and didn't see this topic but if I missed it I apologize.
So my '17 Rebel is completely stock. Only issues I've had is having a leak in my front suspension so the compressor constantly ran till it burnt out. Was under warranty so took it to dealership. Of course that was a...
Hi everyone! I’m new here and just purchased a 2017 Rebel with 35s on 18s.
when I was at the dealership I tried changing the ride height with the buttons but they don’t change when pressing them.
Help would be appreciated.
FYI I did some digging in the forum before posting lol.
thanks
A forum community dedicated to Ram Rebel owners and enthusiasts. Come join the discussion about modifications, classifieds, troubleshooting, maintenance, and more!
Vail_Rebel · updated 
