Ram Rebel Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
83 Posts
Discussion Starter · #1 ·
Hey guys, looking to upgrade wheels and tires on my ram rebel. I think I have finally decided on a size and before I make the jump I wanted to ask your opinion if it will work. The wheel size I am thinking of doing is a 20x10 with a 0 offset. I am looking to hopefully put 35s on there too. I have narrowed it down to NITTO RIDGE GRAPPLERS or TOYO RT's. I don't know much about leveling, lifting etc, so ideally want a setup that will be plug and play essentially with no rubbing or additional mods if possible.

Thanks everyone

 

·
Registered
Joined
·
660 Posts
Most guys that upsize to 35's note some rubbing without some lift adjustment.

However, there are also reports that 34.5's don't rub. To get a 34.5 you would normally put on 315/70r17 tires. Since you're planning to change to 20's, you'll need to look around some more if you want to avoid the rubbing.
 
1 - 2 of 2 Posts
Top