Ram Rebel Forum banner

Fuel Saver indicator?

6651 Views 11 Replies 9 Participants Last post by  NixG80
According to the manual, the dash is supposed to have an option to display the Fuel Saver function is active. Can anyone verify they have some sort of indication that the engine is actually in fuel saver mode?
1 - 12 of 12 Posts
You can use the settings function on your touch screen to turn the indicator on or off
You can use the settings function on your touch screen to turn the indicator on or off
Found it, missed it in the manual... thanks for the help!
is anyone getting bad mileage

i'm getting like 12.5 miles for gallon
I'm pretty sure fuel consumption would be off for the first 500 miles or so.
i did the math not by what the computer said that's how i got the 12.5 I've had the truck two weeks and it almost has 600 on it
I'm pretty sure fuel consumption would be off for the first 500 miles or so.
Probably even more than that. I've heard it can take up to the first 1000 even 2000 in some cases for MPG to reach where they should and to be consistent.
Code:
Yeah I wouldn't expect to see good mileage for the first 500+ miles. Then it should improve after the first few thousand as things get worn in. There are an awful lot of parts that rub together that need to find their happy place, used to heating and cooling and get lubricants absorbed into them.
According to the truck's computer, I'm getting an average 17mpg. Haven't had it on the highway yet, just on country roads with 50mph speed limits. It only has 460 miles on it so far. My calculated mileage is about the same, actually slightly higher, but then who knows how accurate these gas station pumps really are? And one fill-up at 3/4 of a tank isn't very precise. I don't know just how full they actually filled the tank before I left the lot.

I did have to reset the gas mileage in the comp when I got it. Of the 460 miles on it, 126 was put on by the dealer. I bought it off the lot, didn't order it. 2015 w/ Hemi. The economy in the comp when I drove it off the lot was 8mpg. I assume they had it sitting and idling a lot while checking it out and showing it to customers. Resetting it made an immediate huge difference. So I only see fuel calcs based on my driving, not their idling.
I have 2,600 miles mostly highway, I did my own calculations and I'm getting 14 mpg.
In my last vehicle, I always reset the MPG every time I fueled up.
Does anyone with a 2019 Rebel know where in the uconnect system settings do you go to turn on the fuel saver indicator on? I can't find it in any of the settings.

Sent from my CLT-L09 using Tapatalk
1 - 12 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top