Ram Rebel Forum banner

Drive Shaft Rust

4757 Views 8 Replies 6 Participants Last post by  TheGreatRam
I noticed today that there are significant amount of rush on my Rebel drive shaft. Is this normal? Do you guys seeing the same thing as well?
1 - 9 of 9 Posts
Surface rust on the drive shaft is normal. Has anyone tried cleaning the rust and rust proofing it?
normal. My buddy removed the rust with a rust remover than rubber coated it but I don't think it's worth the trouble of removing the rust.
It's definitely inevitable, don't really find a point spending too much attention on it at all
normal. My buddy removed the rust with a rust remover than rubber coated it but I don't think it's worth the trouble of removing the rust.
I would be concerned about uneven application and wobbling, but I suppose the same could be said about rust
I know they don't paint those in case they throw off the balance, guess rubber coating could do the same. Probably best left alone then.
I've read somewhere that painting it won't throw the balance off, worst case scenario you could send it off to get re-balanced but apparently it's nothing to worry about
As long as the rust doesn't go deeper, it should be fine as is.
1 - 9 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top