Ram Rebel Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
11 Posts
Discussion Starter · #1 ·
Hey guys,


I'll be throwing on some 35's this spring, I was wondering if you can clear the control arms with 35x12.5's with the factory offset. Coming from a sport with the 20x9's I had to run 295/65's (35x12) because of that.


Also I will be doing the linkage mod even though i've seen guys clear them on stock height. I've also heard that if you want the front leveled out that you can just swap the linkages from front to back. If that's the case why would anyone pay the $300 for the aftermaket ones if it does the same thing?


Thanks!
 
1 - 1 of 1 Posts
Top